51191596-100
ST318437(8)LW

HM dual logical 1.8GB HD


line

ST318437LW / ST318438LW Seagate drives can be used for the following Honeywell part numbers. The are interchangeable and compatible for either configuration.
51191596-100 = 1.8Gb Dual Logical hard drive
51191596-200 = 875Mb Dual Logical hard drive

WPC NO LONGER SELLS - SEE LINK BELOW FOR DIRECT REPLACEMENT



Solid State HM Drive Replacements Available

Drive capacity ST318437LW 18.400 Gbytes (formatted)
Drive capacity ST318348LW 19.924 Gbytes (formatted)
Read/write heads 2
Bytes/track 384 (401) KBytes
Disc rotational speed 7,200 r/min

The Barracuda 36ES family has the following standard features:
• Integrated Ultra160 SCSI controller
• Multimode SCSI drivers and receivers-single-ended (SE) and low voltage differential (LVD)
• 16 bit I/O data bus on W, LW and LC models. 8 bit I/O data bus on the N model.
• Asynchronous and synchronous data transfer protocol
• Firmware downloadable via SCSI interface
• Selectable even byte sector sizes from 512 to 4,096 bytes/sector
• Programmable sector reallocation scheme
• Flawed sector reallocation at format time
• Programmable auto write and read reallocation
• Reallocation of defects on command (post format)
• Enhanced ECC maximum burst correction length of 240 bits with a guaranteed burst correction length of 233 bits.
• Sealed head and disc assembly
• No preventative maintenance or adjustment required
• Dedicated head landing zone
• Embedded servo design
• Self diagnostics performed when power is applied to the drive
• 1:1 Interleave