51401497-100 is the non-CE power supply for Honeywell's dual-node LCN chassis. WPC replaces the electrolytic capacitors in these power supplies with NEW capacitors and new reset switch prior to testing and certifying.

All our power supplies are shipped pinned for internal line frequency clock. If Sequence of Events (SOE) functionality is required on a NIM, the clock master, the clock slave, and the NIMs with SOE requirements must be pinned for use with external clocks. All other nodes are pinned for internal (line frequency) clock. This jumper is located at the back of the printed circuit board at location J1, and is clearly marked (INT) and (EXT).

WPC refurbishes the Honeywell 51401497-100 LCN power supply by replacing electrolytic capacitors and the reset switch. Testing verifies that the supply output voltage matches specifications.

For the CE version of this power supply, see p/n 51196655-100

Honeywell's dual-node chassis can contain two nodes (for example, two independent Universal Stations) in the same chassis. The chassis contains a fan assembly and two power supplies, which furnish power independently to each of the nodes.