The Honeywell 51196653-100 power supply for the 5-slot chassis is CE-compliant. This supply uses the standard 3-pin connector (as shown), and requires a replacement cable when used with the original 5-slot chassis having the 8-pin power connector. The CE compliant supplies meet the EC safety standards. Enhancements include auto-ranging on the input voltage (102 to 264 RMS) and Power Factor Correction. The cooling fan is now controlled by the ambient temperature and +5V output load, which will reduce fan noise in most cases.

All our power supplies are shipped pinned for internal line frequency clock. If Sequence of Events (SOE) functionality is required on a NIM, the clock master, the clock slave, and the NIMs with SOE requirements must be pinned for use with external clocks. All other nodes are pinned for internal (line frequency) clock. The jumper is located on the printed circuit board directly behind the finger connector, and is clearly marked (EXT) and (INT).

WPC refurbishes LCN power supplies replacing electrolytic capacitors and verify output voltage specs.

The Non-Ce Compliant power supply is 51195066-100